skip to Main Content
01908 470289 info@amppowerprotection.com

MARINE AC UPS

MARINE AC UPS Solutions from AMP Power Protection | Marine Approved UPS

Marine AC UPS – Tower and Rack Format 1-3KVA with a range of accessories (including additional marine filter for above deck installations). For larger loads we provide a range of Marine AC UPS, varying Ingress Protection, single and three phase options from 8KVA to 1100KVA (See ProtectUPS Marine for custom solutions)

uninterruptible power supply

Eaton 9SX Marine

Marine approved 1/2/3kVA AC UPS by DNV.

Marine AC UPS approved by the DNV-GL, On-line double conversion UPS with automatic bypass, available in two power ratings 1000VA/900W & 3000VA /2700W:

  •  Mounting rails
  • Vibration dampers
  • Multilingual LCD display
  • Hot swappable batteries
  • Power management software
  • Relay output
  • USB
  • Serial port
uninterruptible power supply

Eaton 9PX

1.5KVA and 3KVA Models

Eaton 9PX 230V DNV-GL Approved Single Phase. On-line double conversion Eaton Marine UPS with automatic bypass available in the following models:

  • 1500VA Rack/Tower – 2U
  • 3000VA Rack/Tower – 3U

Features:

  • multilingual LCD display
  • hot swappable batteries
  • power management software
  • USB
  • serial port
uninterruptible power supply

Eaton 9PHD

Modular 30-200kVA designed specifically for marine environments

The Eaton 9PHD is a modular UPS with up to 97% efficiency and a power factor of 1. Features vibration dampers and installation brackets to support easy installation on board. The cabinet protection is rated to IP22 with halogen free cables and a black start feature being just a few examples of marine specific features this unit is equipped with.

uninterruptible power supply

Eaton 93PS

8-40KW, IP23 Ingress Protection, Up to 96% Efficiency in double conversion mode

The 93PS Eaton Marine UPS is available from 8KW to 40KW

Features:

  • Spacious power cabling area at the bottom of the unit, Back feed protection and bypass fuses included by default for easier planning and secured safety
  • Ships with any classification society certificate as requested
  • Hot Swap Power Modules mean typical MTTR (very low) / Fully front serviceable
  • No replacement of DC caps during the product design life
uninterruptible power supply

Eaton 9155 – EOL

Marine approved 8-30kVA | Marine AC UPS

DNV type approved, BV type approved and ABS design assessed up to 15kVA. Double conversion online technology.

Features:

  • single phase or three phase input and single phase output
  • small foot print
  • patented Hot Sync parallel capability up to four redundant systems
  • ABM technology to extend battery service life
  • wide communication options
uninterruptible power supply

Eaton 9390

Three phase input/output 40-160kVA

Double conversion online technology.

Features:

  • three phase input and output
  • small foot print
  • patented Hot Sync parallel capability up to four redundant systems
  • ABM technology to extend battery service life
  • wide communication options
uninterruptible power supply

Eaton Power Xpert 9395

Three phase input/output 225-1100kVA

Double-conversion online technology.

Features:

  • three phase input and output
  • small foot print
  • patented Hot Sync parallel capability up to five redundant systems
  • ABM technology to extend battery service life
  • wide communication options
uninterruptible power supply

GE VH Series UPS – CE Listed (700VA-3kVA)

Certified to IACS International Maritime Standard

The GE VH Series UPS is a true VFI (Voltage and Frequency Independent) on line, double conversion range providing secure power for all onboard critical applications. With a tower and/or rackmount design, the Marine AC UPS adapts to adjusting network configurations as facility load requirements change.

Specifications:

  • single phase output – 208/220/230/240V
  • wide input range – 130V to 280V minimising battery use
  • 50/60Hz operation – can be used as a permanent frequency converter
  • phase neutral reversal protection – no risk of unsafe connection
  • high overload capability – continued protection even if overloaded
  • precise output frequency regulation – optimized for use with a generator
  • wide operating temperature – UPS can operate between -10°C to 40°C

Features:

  • unique failsafe internal bypass – continued operation even with overload or over temperature
  • 2U design for all ratings – small footprint; all parts delivered for tower or rack assembly
  • hot swappable batteries – simple battery replacement without disruption to the load
  • matching battery cabinets – longer battery life available with the addition of extra battery cabinet/s
  • superior battery management – providing protection to the battery and extending the battery life
  • remote monitoring – easy access and control even for unmanned or isolated sites MTBF (Mean Time Between Failure) >730,000 hours – Proven reliability
Back To Top